Aside from the massive twin turbos with cast manifold and Type-T wastegates headlining the main stage, GReddy also planted a Type 29 Spec-R front mounted intercooler kit and Airinx AY-mB air intakes to provide efficient air flow circulation. They installed a 70mm turbo Ti-C exhaust system to remove the unwanted air and let their e-manage Ultimate ECU to govern the inner workings of the engine. The internals of the sturdier block include GReddy pistons, connecting rods and piston rings, while GReddy camshafts and L iridium spark plugs take control above; all of which help the bolt-on turbo kit work fluidly within the system. "All the products we develop for this vehicle should make their way to becoming bolt-on products," explained mike. "Once all the hard work of prototyping and tuning is done, production can begin to offer proven products at affordable prices."
GReddy products do not end in the engine bay. The widebody kit is courtesy of GReddy's GRacer over fender SPL model, which is flared close to the factory settings but built slightly more aggressive to fit the wheels and create a meaner stance. It's a seven-piece body kit originally planned to be a custom one-off, but Greddy decided to place it in production because of the popu-larity it garnered at the SEMA show. Painted in OEM Pikes Peak White and covered in Greddy D1 original graphics by Vinyl mayhem, the widebody kit also comes with a rear wing that sits low on the trunk and protrudes enough to collect the proverbial double takes.
Under the chassis is a set of 20-inch Rays Engineering Gram Light wheels, 9.5 inches wide in the front and 10.5 inches in the rear, wrapped in gummy Nitto Invo tires and around GReddy 380mm and 330mm rotors. Gold Volk Racing GT-Fs are used on the track.
Inside the cabin is a pair of blue Bride seats, the Gias model on the driver side and the Stradia on the passenger, matched with Bride Low max rear seats, which complement the overall scheme of blue and white.
Though this complete setup would be perfect to be a special model in Gran Turismo, GReddy is just proud to be the Japanese Import winner of the Gran Turismo Awards. To them, there's nothing like being picked by Yamauchi, the man who fueled the tuning fire that engulfs our lives on a daily basis. It's a feat that GReddy will show off in 2008 and use as inspiration to build the much-anticipated Nissan GT-R, which they hope will fare so well at next year's event. Seeing that they did so well with the '07 350Z, the chance of winning Best in Show doesn't seem so far fetched.
Tweaks
Output 450 whp 700 plus expected at next tune
Engine
GReddy (pistons and rings, rods, camshafts, valves, valve springs, intake manifold, oil pan) cast turbo manifold, TD05H-18G (x2), Type-T wastegate, E-manage Ultimate, PRofec-B Spec2 boost controller, GREx 13-row oil cooler with thermostat, aluminum radiator with pipe kit, radiator hoses, aluminum diversion panels, Type-29 spec-R HG intercooler, aluminum intercooler piping, dual Airinx AY-mB intakes, Turbo Ti-C 70mm dual exhaust, Five Axis dry carbon engine cover
Drivetrain
OS Giken LSD, clutch
Suspension
GReddy Type-S suspension kit
Wheels/Tires
R57-GT Gram Lights rims (20x9.5 front; 20x10.5 rear); Nitto Invo tires (225/30/20 front; 285/30/20 rear). Gold Volk racing GT-F wheels for the track.
Brakes
GReddy 380mm rotor with 8-piston (front), 330mm rotor with 4-piston kit (rear); GReddy/ Earl's stainless lines
Exterior
GReddy Over-Fender SPL body kit (front bumper, rear bumper, side skirts, over fenders, rear wing); OEm Pike's Peak White paint; Greddy D1 vinyl graphics
Interior
GReddy SuperLight shift knob; Bride Gias (driver) and Stradia (passenger) seats; Bride Lox max rear seats
Electronics
GReddy 60mm SmI with data-link