The OCTANE is the newest amplifier from the Phoenix Gold "limited" collection. Based on performance upgrades, this exclusive three-channel amplifier features 800 watts of output power and includes a dedicated mono section optimized for bass hungry installations. In addition, a built-in, one band parametric sub equalizer (Bass Cube(tm)) and an integrated "Rail" stiffening capacitor add to the OCTANE's unique feature-set. OCTANE'S styling embodies totally unique racing cosmetics including an ultra-light aluminum chassis, laser-cut expanded metal venting and logo, and Superbrite(tm) Blue Tri-LED's, all wrapped in carbon-fiber graphics. Octane Features* One-of-a-kind carbon fiber cosmetic finish* Large capacitor bank built-in on the rail voltage to allow for internal voltage stiffing during demanding musical dynamics.* Built-in Basscube allows 15 dB of parametric boost and subsonic filter for low pass section of the amplifier.* TCCH(tm) Thermal Convection Cooled Heatsink. This proprietary design uses two variable speed fans to ensure that the Octane keeps its cool when the music gets hot!* High-current Triple Darlington output stage. This tried and true topology is the standard for outstanding dynamic peak output performance.* TAIM(tm) Timed Acoustically Integrated Muting. Insures dead silent turn on & off, no clicks, pops or buzzes.* 24dB per octave, high pass and low pass crossover. Continuously variable from 40Hz to 800Hz.* Twin-T(tm) bass boost circuit provides up to 18dB of boost at 45Hz.* Superbrite(tm) Tri-LED power-on indicator.* Optional LPL44(tm) Low Pass Level controller allows the driver to adjust bass volume from the driver's seat.* Optional RDDP(tm) Remote Diagnostic Display Panel allows the driver to monitor the amplifier's battery voltage, power-on, thermal and overload status with use of the SDT(tm) or RDDP(tm) kit OCTANE SPECIFICATIONS Continuous Output Power at 1% THD (watts): Into 4 ohms Stereo @ 12.5 Vdc (IASCA/USAC) 37 x 4 Into 4 ohms Stereo @ 14.4 Vdc 100 x 4 Into 2 ohms Stereo @ 14.4 Vdc 200 x 4 Into 4 ohms Bridged @ 14.4 Vdc 400 x 2 Minimum Speaker Load, Bridged 2 ohms Minimum Speaker Load, Stereo 1 ohm Chassis Dimensions 13.00L x 29.00W x 2.50H Overall Dimensions 13.00L x 30.00W x 2.50H Bass Boost Center Frequency 20Hz to 110Hz BASS BOOST CHARACTERISTIC, SWITCH SELECTED: WideQ = 2 Narrow Q = 6 Bass Boost Level 0 to 15dB SUBSONIC FILTER: Slope 18dB per octave Tracking Freq 1/3 octave below Boost Freq. Fixed Freq 25Hz Typical Total Harmonic Distortion <0.02% Signal to Noise Ratio (A-weighted) >100dB Frequency Response 1dB, 20Hz to 20kHz Bass Boost 0 to +18dB @ 45Hz Crossover Frequenty Range 40Hz to 800Hz Crossover Slope 24dB per octave Input Sensitivity 200 millivolts to 6 volts Input Impedance >30 kohms Power Supply Operating Range 10.0 Vdc to 15.5 Vdc Typical Current Draw at Idle <3 amps HOTBOX Phoenix gold international, Inc. 9300 N. Decatur Portland OR 97203 Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!