Blitz Radiator Cap
Blitz radiator caps are designed to hold greater pressure than factory units, allowing the cap to withstand extreme heat conditions and stress. All caps are constructed of full stainless steel and utilize a urethane seal.
Fits: Many Applications Available
web: blitz-performance.com
MSRP: $25.00
Turbosmart Blow-Off Valve
Compact in size, this entry-level BOV is ideally suited for cars with restrictive engine bays. Recommended for engines up to 1.5L in capacity producing standard or mildly increased boost. Supplied with a stainless steel weld-on adapter. Also available in a black anodized Sleeper Series application.
Fits: Universal
web: turbosmart.com.au
MSRP: $149.00
DC Sports Universal Muffler
DC Sports' universal mufflers feature the same superior quality found in their complete exhaust systems including 100 percent 304 stainless-steel construction, a straight-through muffler core and a stylish, straight-cut exhaust tip. Perfect for any custom exhaust system.
Fits: Universal
web: dcsports.com
MSRP: Check Websit
Cusco Oil Catch Can
Cusco's oil catch can comes in two different universal sizes (9mm and 15mm), as well as vehicle specific applications. Polished to a mirror finish with Cusco blue fittings and brackets, this kit is attractive and functional. The easy-to-read oil level indicator doubles as the drain tube, just use the quick disconnect fittings and drain the can.
Fits: Universal
www.napsusa.com
MSRP: $112.00
TurboXS KnockLite
Detonation is the most likely cause of engine failure and TurboXS has come up with an easy-to-install and affordable warning system to help keep your engine safe. The TurboXS Knocklite monitors the stock knock sensor and alerts the driver through a multi-stage LED if detonation occurs. This sophisticated tuning tool also includes a user-programmable shift light.
Fits: Universal
web: turboxs.com
MSRP: $129.00
GReddy Extreme Timing Belt
Engineered to increase heat resistance, flexibility and durability, these belts reduce the chances of cracking, stretching, skipping, or snapping. Compared to stock, an improvement in material and construction will lead to a more reliable belt that will be more consistent and longer lasting.
Fits: Many Applications Available
web: greddy.com
MSRP: $142.00-$206.00
Carbing Catch Tank
The beautifully designed and constructed Carbing Catch Tank is designed to capture any expelled gases and liquids from the engine. It incorporates two inlets, 0.6L capacity, level indicator, and drain plug. The lightweight aluminum tank also features a compact design to allow for mounting in almost any location. Distributed by TEIN USA.
Fits: Universal
web: tein.com
MSRP: $110.00
A'PEXi Power Intake
The Power Intake incorporates a newly developed material (layer filter of dry density fibers) that improves the element density. This allows maximum protection from foreign materials entering the engine. The Power Intake's dry filter design renders it virtually maintenance free. Some of the problems associated with wet type cleaners, such as oil sticking to the air flow meter, are a thing of the past.
Fits: Many Applications Available
web: apexi-usa.com
MSRP: Check Website
TurboXS Fuel Cut Defender
TurboXS has come up with a unique solution when compared to the typical aftermarket fuel cut devices. The TurboXS FCD can raise the fuel cut point of your car to retain some measure of safety provided by the factory fuel cut. If desired, the TurboXS FCD can also function as a traditional FCD by eliminating fuel cut entirely.
Fits: Universal
www.turboxs.com
MSRP: $129.00
GReddy Iridium Spark Plugs
GReddy spark plugs are designed for cooler heat ranges to reduce heat and the chance of pre-ignition. Iridium Tune plugs are ideal for a mildly tuned engine, factory turbos, or bolt-on turbo kit vehicles. Pro Iridium plugs are ideal for high-horsepower, high-boost applications. The new Long Reach plugs are designed for specific applications, such as the Nissan 350Z.
Fits: Universal
web: greddy.com
MSRP: $19.50-$32.95
Spoon Sports Head Gasket
Manufactured 0.45mm thinner than factory stock for a slight increase in engine compression, this gasket also features a two-piece reinforced metal design.
Fits: Honda B-Series Engines
web: spoonsports.us
MSRP: $140.00
ARC Water Pump Pulley
ARC's lightweight aluminum water pump pulley reduces parasitic drag on the engine and frees up extra power. A 5% saller than stock diameter increases water pump revolutions at lower RPM's and increases the volume of coolant being moved throughout the RPM range. Available in blue or silver.
Fits: 350z, Rx-8, Sr20det
web: Mackinindustries.Com
MSRP: $135.00
Unorthodox Racing Tuner Series
Crank Pulley
UR crank pulleys can add substantial horsepower and torque gains across the entire RPM range through reduced weight. An average of 2.7 horsepower is gained for every pound removed from the engine's crankshaft. Furthermore, 15-20 percent more gains are realized by under-driving the vehicle's accessories.Fits: Many Applications Availableweb: unorthodoxracing.comMSRP: Under $95.00
Buddy Club V-Con VTEC Controller
Being able to move your VTEC changeover point is essential when you're trying to fine-tune your VTEC engine. Aftermarket cams and higher rev limits may prompt you to set the VTEC changeover point to a higher place in the RPM band for normally aspirated engines. Turbocharged engines may be better suited with lower VTEC changeover points to help build boost at a lower RPM.
Fits: VTEC-equipped Acura/Honda
web: buddyclub.us
MSRP: $55.00
K&N Performance Gold Oil Filters
You spend good money on the best oil for your car, why skimp on the filter? K&N uses the best, proven filtration media with drilled safety wire holes for racing applications, a 1-inch nut for easy on/off installation and an anti-drain back valve.
Fits: Many Applications Available
web: knfilters.com
MSRP: Check Website
Edelbrock Pro-Flo Fuel Rail
Designed for stock or Edelbrock intake manifolds, these fuel rails are fully CNC machined from aluminum extrusions, polished, and then hard anodized for use with racing fuels (including methanol). These Edelbrock fuel rails include a fuel pressure regulator mount at the end of the rail that can be used with stock or aftermarket regulators and two auxiliary 1/8-inch NPT ports for a pressure gauge, nitrous system fuel supply, etc.
Fits: Acura Integra, Honda Civic
web: edelbrock.com
MSRP: $140.00
AEM DryFlow Air Filter
AEM's Dryflow synthetic air filter eliminates the hassle of re-oiling after cleaning and is independently tested to have better filtration and dust trapping capabilities than any other performance aftermarket filter. AEM's unique, non-woven polyester element filters out 98.6 percent of airborne dust in initial efficiency, and filters down to one micron of particulate.
Fits: Universal
web: aempower.com
MSRP: Check Website
Injen Engine Dress-Up
Injen Technology develops accessories to compliment the engine bay of some of today's most popular vehicles. All billet parts are CNC-machined in house from 6063 T-6 aluminum alloy. The sheet metal parts are stamped in punch presses or CNC fabricated with auto-index tooling. In today's high-tech world, Injen Technology produces only precision and quality parts guaranteed to fit every time.
Fits: Many Applications Available
web:injen.com
MSRP: Check Website
ATI e-Pod
ATI's e-Pod is the latest in gauge pod technology, allowing full rotational movement for custom viewing angles. Pods are designed to fit both 52mm and 60mm gauges, and have provisions for meter wires to keep installation simple and neat. Injection molded of high impact ABS plastic with UV additives for quality and precise fitment. Distributed by TEIN USA.Fits: Many Applications Availableweb:.tein.comMSRP: Check Website