Honda Civic B18 Cams Install - Now You Know It- Back To The Basics
|
Using a 19mm socket and long extension, have the steering wheel fully clocked to the left to gain access to the crank pulley. Rotate the main crank pulley located directly under the driver side wheel well in a counter clockwise rotation to the TDC position-otherwise known as Top dead center. Removing all four spark plugs from the engine before hand cranking the pulley helps to facilitate an easier rotation. Align the notch on the plastic cover with the line etched in white on the pulley. Use the single marking, just right of the distributor timings three etched marks to determine if the pistons are TDC. View Related Article
|
|