2004 Subaru WRX - Keeping Under Pressure Cool - Tech Knowledge
|
Bolt up the lower tubing. And you're almost finished! Before you bolt back on your front bumper cover, you'll need to trim it a little to clear the new Perrin FMIC and plumbing. Here is the only tricky part of the install. Check out our pics of Mark's bumper after modification to get an idea of how yours should look, and use an air grinder or Dremel to do the job and Trim little by little, using tape to mark straight lines. test-fit the bumper as you go, then straighten out the intercooler and tighten it down. This part takes some time, so be sure not to rush yourself for best results. View Related Article
|
|